輔酶A系列產品色譜方法說明
瀏覽次數:1561 發布日期:2020-7-31
來源:本站 僅供參考,謝絕轉載,否則責任自負
關于ZL-23010 – ZL-23078 的輔酶A系列產品,國外建議如下:
輔酶A衍生物
不建議使用普通的RP C18色譜柱進行分析,因這類化合物會粘附在色譜柱上,難以從色譜柱中洗脫出來。
色譜條件建議如下:
Chromolith Type色譜柱
洗脫劑:10%溶劑B(乙腈/甲醇)+ 90%溶劑A(0.1%甲酸水溶液)
若您
選取的是普通的C18色譜柱,溶劑A務必調整為0.2% 三氟乙酸(TFA) 水溶液即每1L水中三氟乙酸用量2mL (溶劑A)。
梯度洗脫 溶劑A:0.2%TFA水溶液 溶劑B:乙腈/甲醇
0 - 8 min A:B = 80:20
8 - 9 min B = 100%
9 - 10 min A:B = 80:20
國外關于該類產品的原文說明如下:
Please tell the customer he should read the Certificate of analysis with attention,
because the Coenzyme-A-Derivatives can NOT be tested with usual, ordinary RP C18 columns, because the compound is stick (adhere) on the column an it is NOT eluting from the column !!!
For getting elution, the customer need to use Chromolith Type columns with 0.1% Formic Acid in Water and starting HPLC-MS conditions with 10% Solvent B (Acetonitril or MeOH) and 90% Solvent A (Water with 0.1% Formic Acid).
In case of using common RP C18 columns, proceed as following: Use as Solvent A 0.2% TFA (Trifluoroacetic Acid - this is meaning 2ml TFA per Liter Water) and starting HPLC-MS conditions using 20% Solvent B (Acetonitril or MeOH) and 90% Solvent A (Water with 0.2% Trifluoroacetic Acid) than increase in 8 minutes the Solvent B to 100%, keep 1 minute at 100% and go back to 20% Solvent B in 1 Minute keeping this gradient for another minute.